How to remove Benben license plate light
Recently, with the increasing popularity of car modification and independent maintenance, "How to remove Benben license plate light" has become the focus of many car owners. This article will combine the hot topics and hot content on the Internet in the past 10 days to provide you with a detailed analysis of the disassembly steps of the Benben license plate light and provide structured data reference.
1. Popular car modification topics on the Internet in the past 10 days
| Ranking | topic | search volume | Platform popularity |
|---|---|---|---|
| 1 | Car license plate light replacement | 156,000 | Douyin, Baidu |
| 2 | BenBen DIY Repair Tutorial | 82,000 | Autohome, Bilibili |
| 3 | LED license plate light modification | 67,000 | Taobao, JD.com |
| 4 | New energy vehicle lighting system | 53,000 | Understand car emperor |
2. Detailed steps for disassembling Benben license plate light
1.Preparation tools: Requires a Phillips screwdriver, a plastic pry bar (to avoid scratching the car paint), and a new license plate light (if it needs to be replaced).
2.Position the license plate light: The license plate lights of Benben models are generally located on the inside of the trunk lid, one on the left and one on the left.
3.Disassembly steps:
| steps | Operating Instructions | Things to note |
|---|---|---|
| first step | Open the trunk and find the license plate lamp cover | Avoid using too much force |
| Step 2 | Use a plastic spudger to gently pry off the edge of the lampshade | Start prying from below |
| Step 3 | Take out the old light bulb (just rotate it 90 degrees) | Wear gloves |
| Step 4 | Install new bulbs and test | Test without installing the lampshade first |
| Step 5 | Reset lampshade | Hearing a "click" sound indicates that it is in place |
3. Frequently Asked Questions
1.Why is my license plate light cover so tight?
It may be that the buckle has aged if it has not been disassembled for a long time. It is recommended to spray a small amount of WD-40 lubricant before trying again.
2.What should I pay attention to when replacing the LED license plate light?
It is necessary to confirm the voltage matching (usually 12V). It is recommended to choose well-known brands such as Philips, Osram, etc.
3.What should I do if a fault light alarm occurs after disassembly?
It may be caused by poor contact. If the alarm still occurs after reinstallation, you need to use OBD equipment to eliminate the fault code.
4. Recommended popular license plate light models in 2023
| brand | Model | brightness | price range |
|---|---|---|---|
| Philips | X-tremeUltinon | 6000K | 150-200 yuan |
| Osram | LEDriving | 5000K | 120-180 yuan |
| Shellette | G series | 6500K | 80-120 yuan |
5. Safety precautions
1. Be sure to disconnect the vehicle power supply before operation to avoid the risk of short circuit.
2. When operating in winter, please pay attention to the increased brittleness of plastic parts and use more gentle force.
3. Modified lights must comply with the "Technical Conditions for Motor Vehicle Operation Safety" and avoid using excessively bright or blue lights.
Through the above detailed guidance, I believe you have mastered the disassembly method of Benben license plate light. If you want more knowledge on car maintenance, you can follow the recently popular #carDIYChallenge topic to get more practical tips.
check the details
check the details
en
