How to remove Southeast car door

How to remove Southeast car door

Recently, car repair and DIY modification have become one of the hot topics. Many car owners hope to solve problems such as abnormal noise, replace accessories or upgrade the sound by disassembling the car door themselves. This article will introduce in detail the disassembly steps of Southeast automobile doors, and attach hot topic data in the past 10 days for reference.

1. Hot topic data in the past 10 days

2. Southeast door disassembly steps

Step 1: Preparation

• Tool preparation: Phillips screwdriver, plastic pry bar, 10mm socket wrench
• Safety Tip: Disconnect the negative terminal of the vehicle battery to prevent short circuit
• Estimated time: about 30-60 minutes (it is recommended to reserve 2 hours for the first operation)

Step 2: Remove the interior panels

① Use a plastic pry bar to start from the bottom of the door and gradually pry open the interior panel buckle.
② Find and remove the fixing screws on the armrest (usually 2-3)
③ Pull up the interior panel and pay attention to the connection between the door lock cable and the window control cable.

Step 3: Disconnect the electrical connections

• Window control plug: press the buckle to remove
• Door lock cable: Use needle nose pliers to loosen the retaining snap ring
• Rearview mirror wiring harness (some models): There is a waterproof rubber sleeve that needs to be separated carefully

Step 4: Remove the door body

① Remove the door hinge bolts (usually a 13mm socket is required)
② Two people work together to hold the car door to prevent falling
③ Check whether the wiring harness is completely separated
④ Make sure to save all gaskets and positioning pins

3. Precautions

•Sealing restoration: The door waterproof film strip needs to be replaced when reinstalling
•Screw classification: It is recommended to use magnetic trays to classify screws of different specifications.
•Line check: Test all electronic functions (windows, central locking, etc.) after disassembly and assembly
•Professional assistance: If you encounter a welded hinge, you need to seek help from a professional repair center

4. Recommended popular tools

Through the above structured disassembly guide, car owners can systematically complete the disassembly of Southeast car doors. It is recommended to record the video recording steps during the first operation to facilitate review of the installation process. If abnormal corrosion or structural damage is found during the process, you should contact the 4S store for professional maintenance in time.